针对弯道拖车轨迹规划难题，提出渐增采样优化方法，提升精度同时降低计算量。

In this work, we propose an optimization-based trajectory planner for tractor-trailer vehicles on curvy roads. The lack of analytical expression for the trailer's errors to the center line pose a great challenge to the trajectory planning for tractor-trailer vehicles. To address this issue, we first use geometric representations to characterize the lateral and orientation errors in Cartesian frame, where the errors would serve as the components of the cost function and the road edge constraints within our optimization process. Next, we generate a coarse trajectory to warm-start the subsequent optimization problems. On the other hand, to achieve a good approximation of the continuous-time kinematics, optimization-based methods usually discretize the kinematics with a large sampling number. This leads to an increase in the number of the variables and constraints, thus making the optimization problem difficult to solve. To address this issue, we design a Progressively Increasing Sampling Number Optimization (PISNO) framework. More specifically, we first find a nearly feasible trajectory with a small sampling number to warm-start the optimization process. Then, the sampling number is progressively increased, and the corresponding intermediate Optimal Control Problem (OCP) is solved in each iteration. Next, we further resample the obtained solution into a finer sampling period, and then use it to warm-start the intermediate OCP in next iteration. This process is repeated until reaching a threshold sampling number. Simulation and experiment results show the proposed method exhibits a good performance and less computational consumption over the benchmarks.