通过视觉感知实现草莓采摘机器人故障自诊断与自动修复
Vision-Based Early Fault Diagnosis and Self-Recovery for Strawberry Harvesting Robots
- 端到端SRR-Net统一检测果实与夹爪,实现故障定位
- 误差补偿使夹爪对准精度提升至3.12毫米,滑脱预测准确率达88.89%
- 适合农业机器人研发人员参考,解决采摘中的误抓与滑落问题
草莓采摘机器人面临视觉感知差、夹爪错位、空抓/误抓及滑脱等问题,影响采摘稳定性和效率。本文提出一种基于视觉的故障诊断与自恢复框架。通过端到端SRR-Net联合完成果实与夹爪的检测、分割及成熟度回归,实现统一感知。基于此,设计了由目标-夹爪同步检测驱动的相对误差补偿方法,修正超出容差的位姿偏差。在末端集成微型光学相机,提供实时视觉反馈。利用MobileNet V3-Small分类器在放气阶段进行抓取调整,提前中止空抓或误抓。在剪切阶段采用时间序列LSTM分类器预测滑脱,据此执行再充气与二次剪切(对滑脱草莓),或直接中止流程(已滑脱)。实验表明,末端执行器与目标点间的平均绝对误差从x轴11.50毫米、y轴5.25毫米降至3.12毫米和4.06毫米,耗时增加0.64±0.24秒;抓取调整模块节省约0.5秒,避免失败后放置;滑脱预测模块对滑脱情况处理成功率达88.89%,每周期节省约4.00秒;对滑脱草莓恢复率81.25%,额外耗时0.63秒。
原文摘要 · Abstract (English)
Strawberry-harvesting robots faced challenges such as poor visual perception, gripper misalignment, empty grasp/misgrasp, and slippage, which reduced harvesting stability and efficiency.To overcome these issues, this paper proposes a visual fault diagnosis and self-recovery framework. An end-to-end SRR-Net achieved unified perception and fault diagnosis through joint detection, segmentation, and ripeness regression of the fruit and gripper. Leveraging this integrated perception, a relative error compensation method driven by simultaneous target-gripper detection was designed to correct positional misalignments exceeding the tolerance threshold. A micro-optical camera integrated within the end-effector delivered real-time visual feedback. Based on the micro-optical camera, a MobileNet V3-Small classifier was utilized for grasp adjustment during the deflating stage, enabling the early abort of the harvesting cycle in cases of empty grasp/misgrasps. Furthermore, a time-series LSTM classifier was applied during the snap-off stage to predict strawberry slippage. Based on these predictions, the system executed re-inflation and a secondary snap-off attempt for slipping strawberries, or aborted the cycle for slipped strawberries. Experiments demonstrated that the mean absolute errors between the end-effector and the picking point were reduced to 3.12 mm and 4.06 mm from 11.50 mm and 5.25 mm along the x- and y-axes, respectively, at the cost of a time increment of 0.64 $pm$ 0.24 s. The grasp adjustment module reduced the grasping phase by approximately 0.5 s and avoided empty-placement for failure cases. The strawberry slip prediction module handled slipped cases with an 88.89% success rate, saving approximately 4.00 s per harvesting cycle for failure cases. Also, it achieved an 81.25% recovery rate for slipping strawberries, requiring additional 0.63 s for re-grasping.
Thank you to arXiv for use of its open access interoperability. PaperDance 不是 arXiv 官方产品;中文卡片由大模型生成,请以原文为准。