arXiv:2602.02798eess.IVcs.CV2026-02

实时精准分割OCT图像,助力机器人角膜手术不穿孔

Real-time topology-aware M-mode OCT segmentation for robotic deep anterior lamellar keratoplasty (DALK) guidance

  • 用UNeXt+拓扑正则化方法稳定低信噪比下的分层边界
  • 端到端处理速度超80帧/秒,满足手术实时需求
  • 适合需要高精度实时深度反馈的微创外科机器人系统

机器人深前部板层角膜移植术(DALK)需精确实时的深度反馈以接近后弹力层(DM)而不穿孔。术中M模式光学相干断层扫描(OCT)提供高时间分辨率的深度轨迹,但散斑噪声、信号衰减及器械阴影常导致层界面不连续或模糊,影响解剖一致性分割,尤其在部署帧率下挑战巨大。本文提出一种轻量级、拓扑感知的M模式分割流水线,基于UNeXt架构并引入解剖拓扑正则化,有效提升低信噪比条件下边界连续性与层序稳定性。系统在单张GPU上实现端到端吞吐量超过80 Hz,涵盖预处理、推理与叠加全流程,展现出超越模型仅时延的实际实时指导能力。该运行余量可容纳低质量或丢帧数据,同时保持稳定的有效深度更新速率。在标准兔眼M模式数据集上,采用既定基线协议评估显示,该方法相比无拓扑感知对照组显著提升边界稳定性,且维持可部署的实时性能。

原文摘要 · Abstract (English)

Robotic deep anterior lamellar keratoplasty (DALK) requires accurate real time depth feedback to approach Descemet's membrane (DM) without perforation. M-mode intraoperative optical coherence tomography (OCT) provides high temporal resolution depth traces, but speckle noise, attenuation, and instrument induced shadowing often result in discontinuous or ambiguous layer interfaces that challenge anatomically consistent segmentation at deployment frame rates. We present a lightweight, topology aware M-mode segmentation pipeline based on UNeXt that incorporates anatomical topology regularization to stabilize boundary continuity and layer ordering under low signal to noise ratio conditions. The proposed system achieves end to end throughput exceeding 80 Hz measured over the complete preprocessing inference overlay pipeline on a single GPU, demonstrating practical real time guidance beyond model only timing. This operating margin provides temporal headroom to reject low quality or dropout frames while maintaining a stable effective depth update rate. Evaluation on a standard rabbit eye M-mode dataset using an established baseline protocol shows improved qualitative boundary stability compared with topology agnostic controls, while preserving deployable real time performance.

医学影像实时分割机器人手术OCT

Thank you to arXiv for use of its open access interoperability. PaperDance 不是 arXiv 官方产品;中文卡片由大模型生成,请以原文为准。