用笔记本自带Wi-Fi检测人体存在,无需外接设备或摄像头。
Human Presence Detection via Wi-Fi Range-Filtered Doppler Spectrum on Commodity Laptops
- 通过滤波多普勒谱聚焦特定距离区域,降低计算开销。
- 空闲时采样率10Hz,有动作时自动升至100Hz,节能高效。
- 无需校准或训练,适用于多种环境和设备。
人体存在检测(HPD)是实现日常设备智能功耗管理和安全功能的关键。本文提出首个基于单向Wi-Fi感知的HPD方案,仅利用设备内置Wi-Fi硬件即可检测用户位置,无需外部设备、接入点或额外传感器。与现有依赖外部专用传感器或摄像头的方法不同,本方案避免了成本增加和隐私风险。我们提出一种新型的范围滤波多普勒谱(RF-DS)技术,可在信道冲激响应(CIR)域中对目标距离区域进行筛选,再进行多普勒分析,从而显著降低计算复杂度。同时,采用频域时间窗设计,提升了估计稳定性。此外,提出自适应多速率处理框架:空闲时以10Hz低帧率采样,检测到运动时切换至100Hz高帧率。该方案是首个在商用笔记本内置网卡上实现的低复杂度占用检测系统,无需外部网络基础设施或专用传感器,且可跨环境、跨设备部署,无需校准或重训练。
原文摘要 · Abstract (English)
Human Presence Detection (HPD) is key to enable intelligent power management and security features in everyday devices. In this paper we propose the first HPD solution that leverages monostatic Wi-Fi sensing and detects user position using only the built-in Wi-Fi hardware of a device, with no need for external devices, access points, or additional sensors. In contrast, existing HPD solutions for laptops require external dedicated sensors which add cost and complexity, or rely on camera-based approaches that introduce significant privacy concerns. We herewith introduce the Range-Filtered Doppler Spectrum (RF-DS), a novel Wi-Fi sensing technique for presence estimation that enables both range-selective and temporally windowed detection of user presence. By applying targeted range-area filtering in the Channel Impulse Response (CIR) domain before Doppler analysis, our method focuses processing on task-relevant spatial zones, significantly reducing computational complexity. In addition, the use of temporal windows in the spectrum domain provides greater estimator stability compared to conventional 2D Range-Doppler detectors. Furthermore, we propose an adaptive multi-rate processing framework that dynamically adjusts Channel State Information (CSI) sampling rates-operating at low frame rates (10Hz) during idle periods and high rates (100Hz) only when motion is detected. To our knowledge, this is the first low-complexity solution for occupancy detection using monostatic Wi-Fi sensing on a built-in Wi-Fi network interface controller (NIC) of a commercial off-the-shelf laptop that requires no external network infrastructure or specialized sensors. Our solution can scale across different environments and devices without calibration or retraining.
Thank you to arXiv for use of its open access interoperability. PaperDance 不是 arXiv 官方产品;中文卡片由大模型生成,请以原文为准。